This is suitable for all decks with two-part metal platters such as the LP12 and Thorens 160 etc. and is designed to minimise resonance from being transmitted to the outer platter from the sub platter. Noise can be transmitted to the sub platter from the main bearing and/or the motor and the small isolating discs in this kit minimise this noise getting through to the outer platter. It lowers the overall noise floor of the turntable and simply makes it sound better! The Tripod Platter Mount Kit contains three isolating discs 1mm thick x 8mm diameter which should be placed equidistantly around the lip of the sub platter as shown in the second picture. The discs are made from a specially selected polymer (beware of imitations, this is our design) chosen after many hours listening tests. The discs will increase the height of the platter by 1mm so you may need to adjust the tonearm height. If you have a turntable which uses a glass or polymer platter (sitting on top of a sub platter) you can still use this kit but you may wish instead to get the adjustable height kit which includes 2mm and 3mm discs. Rega users should instead go for the Platter Isolating Kit for Rega turntables.

The Clear Acrylic Platter Mat is ideal for those of you using a deck with a glass or alloy platter, but wishing to experience the sound quality of acrylic. It provides a neutral 'see-through' type sound quality with much improved dynamics. Incidentally, we also do an identical acrylic platter mat in jet black finish. Our 10mm, 12mm & 20mm acrylic replacement platters work wonders on Rega's and other decks with factory fitted glass platters, as well as decks like the Transcriptors which do not, in standard form, support the record over the whole playing surface. Unfortunately, we can't make them for Thorens or similar alloy platter decks as the dimensions required (to allow clearance for the motor pulley) make the acrylic platter far too light to balance the suspension. This mat, however, is the next best thing.... The rigid mat is 3mm thick, so you should not have to adjust the vertical tracking angle too much, as most standard mats are around 2mm thick. Diameter is 292mm. Weight is 221g. The playing surface is exceptionally smooth and the label recess enables perfect record support. The flip side is as smooth as the top face, and is brilliant for setting arm bias (anti-skate force). You simply place the stylus on it and adjust until the arm sits in the same place and does not move toward the centre or the edge. This will not damage the stylus and is arguably the most accurate way of setting the bias on your tonearm. The mat is shipped in a strong cardboard LP mailer, so it will reach you in the same perfect condition that it left us.

The isolation rings are superb under platforms made from acrylic, wood, plastic or even glass and also work brilliantly when replacing equipment feet – directly supporting the component.

Our rings are available in 30, 50 or 70 Duro rated Sorbothane. The Duro rating is the ‘hardness’ of the rings, 30 being the softest and 70 the hardest. You should use the ones most suited to the equipment you wish to isolate. 

The rings come complete with base discs which are 40mm diameter and 1mm thick. These are made from a polymer which we have determined works best in conjunction with the rings. Each ring comes complete with 2 base discs which means the spare discs can be used for levelling where needed. The sorbothane is naturally quite ‘tacky’ so the base discs cling to it and the rings will also cling nicely to any smooth surface.

To determine which isolation rings you require, take the approximate maximum weight (of the equipment plus any platform) and then divide it by the number of rings you are using. The load weights we suggest are those we have found work best sonically – the rings will actually support quite a bit more but isolation will be compromised. 

Dimensions: Outside Diameter 40mm, Inside Diameter 20mm, Height 15mm. Weight 20 grams.

SRM TECH recommended maximum load rating for audio applications

Light duty 30 Duro – 5kg / 11lbs per isolator

Standard duty 50 Duro – 9kg / 20 lbs per isolator

Heavy duty 70 Duro – 14kg / 31 lbs per isolator

The isolation rings are superb under platforms made from acrylic, wood, plastic or even glass and also work brilliantly when replacing equipment feet – directly supporting the component.

Our rings are available in 30, 50 or 70 Duro rated Sorbothane. The Duro rating is the ‘hardness’ of the rings, 30 being the softest and 70 the hardest. You should use the ones most suited to the equipment you wish to isolate. 

The rings come complete with base discs which are 40mm diameter and 1mm thick. These are made from a polymer which we have determined works best in conjunction with the rings. Each ring comes complete with 2 base discs which means the spare discs can be used for levelling where needed. The sorbothane is naturally quite ‘tacky’ so the base discs cling to it and the rings will also cling nicely to any smooth surface.

To determine which isolation rings you require, take the approximate maximum weight (of the equipment plus any platform) and then divide it by the number of rings you are using. The load weights we suggest are those we have found work best sonically – the rings will actually support quite a bit more but isolation will be compromised. 

Dimensions: Outside Diameter 40mm, Inside Diameter 20mm, Height 15mm. Weight 20 grams.

SRM TECH recommended maximum load rating for audio applications

Light duty 30 Duro – 5kg / 11lbs per isolator

Standard duty 50 Duro – 9kg / 20 lbs per isolator

Heavy duty 70 Duro – 14kg / 31 lbs per isolator

The isolation rings are superb under platforms made from acrylic, wood, plastic or even glass and also work brilliantly when replacing equipment feet – directly supporting the component.

Our rings are available in 30, 50 or 70 Duro rated Sorbothane. The Duro rating is the ‘hardness’ of the rings, 30 being the softest and 70 the hardest. You should use the ones most suited to the equipment you wish to isolate. 

The rings come complete with base discs which are 40mm diameter and 1mm thick. These are made from a polymer which we have determined works best in conjunction with the rings. Each ring comes complete with 2 base discs which means the spare discs can be used for levelling where needed. The sorbothane is naturally quite ‘tacky’ so the base discs cling to it and the rings will also cling nicely to any smooth surface.

To determine which isolation rings you require, take the approximate maximum weight (of the equipment plus any platform) and then divide it by the number of rings you are using. The load weights we suggest are those we have found work best sonically – the rings will actually support quite a bit more but isolation will be compromised. 

Dimensions: Outside Diameter 40mm, Inside Diameter 20mm, Height 15mm. Weight 20 grams.

SRM TECH recommended maximum load rating for audio applications

Light duty 30 Duro – 5kg / 11lbs per isolator

Standard duty 50 Duro – 9kg / 20 lbs per isolator

Heavy duty 70 Duro – 14kg / 31 lbs per isolator

The isolation rings are superb under platforms made from acrylic, wood, plastic or even glass and also work brilliantly when replacing equipment feet – directly supporting the component.

Our rings are available in 30, 50 or 70 Duro rated Sorbothane. The Duro rating is the ‘hardness’ of the rings, 30 being the softest and 70 the hardest. You should use the ones most suited to the equipment you wish to isolate. 

The rings come complete with base discs which are 40mm diameter and 1mm thick. These are made from a polymer which we have determined works best in conjunction with the rings. Each ring comes complete with 2 base discs which means the spare discs can be used for levelling where needed. The sorbothane is naturally quite ‘tacky’ so the base discs cling to it and the rings will also cling nicely to any smooth surface.

To determine which isolation rings you require, take the approximate maximum weight (of the equipment plus any platform) and then divide it by the number of rings you are using. The load weights we suggest are those we have found work best sonically – the rings will actually support quite a bit more but isolation will be compromised. 

Dimensions: Outside Diameter 40mm, Inside Diameter 20mm, Height 15mm. Weight 20 grams.

SRM TECH recommended maximum load rating for audio applications

Light duty 30 Duro – 5kg / 11lbs per isolator

Standard duty 50 Duro – 9kg / 20 lbs per isolator

Heavy duty 70 Duro – 14kg / 31 lbs per isolator

The isolation rings are superb under platforms made from acrylic, wood, plastic or even glass and also work brilliantly when replacing equipment feet – directly supporting the component.

Our rings are available in 30, 50 or 70 Duro rated Sorbothane. The Duro rating is the ‘hardness’ of the rings, 30 being the softest and 70 the hardest. You should use the ones most suited to the equipment you wish to isolate. 

The rings come complete with base discs which are 40mm diameter and 1mm thick. These are made from a polymer which we have determined works best in conjunction with the rings. Each ring comes complete with 2 base discs which means the spare discs can be used for levelling where needed. The sorbothane is naturally quite ‘tacky’ so the base discs cling to it and the rings will also cling nicely to any smooth surface.

To determine which isolation rings you require, take the approximate maximum weight (of the equipment plus any platform) and then divide it by the number of rings you are using. The load weights we suggest are those we have found work best sonically – the rings will actually support quite a bit more but isolation will be compromised. 

Dimensions: Outside Diameter 40mm, Inside Diameter 20mm, Height 15mm. Weight 20 grams.

SRM TECH recommended maximum load rating for audio applications

Light duty 30 Duro – 5kg / 11lbs per isolator

Standard duty 50 Duro – 9kg / 20 lbs per isolator

Heavy duty 70 Duro – 14kg / 31 lbs per isolator

The isolation rings are superb under platforms made from acrylic, wood, plastic or even glass and also work brilliantly when replacing equipment feet – directly supporting the component.

Our rings are available in 30, 50 or 70 Duro rated Sorbothane. The Duro rating is the ‘hardness’ of the rings, 30 being the softest and 70 the hardest. You should use the ones most suited to the equipment you wish to isolate. 

The rings come complete with base discs which are 40mm diameter and 1mm thick. These are made from a polymer which we have determined works best in conjunction with the rings. Each ring comes complete with 2 base discs which means the spare discs can be used for levelling where needed. The sorbothane is naturally quite ‘tacky’ so the base discs cling to it and the rings will also cling nicely to any smooth surface.

To determine which isolation rings you require, take the approximate maximum weight (of the equipment plus any platform) and then divide it by the number of rings you are using. The load weights we suggest are those we have found work best sonically – the rings will actually support quite a bit more but isolation will be compromised. 

Dimensions: Outside Diameter 40mm, Inside Diameter 20mm, Height 15mm. Weight 20 grams.

SRM TECH recommended maximum load rating for audio applications

Light duty 30 Duro – 5kg / 11lbs per isolator

Standard duty 50 Duro – 9kg / 20 lbs per isolator

Heavy duty 70 Duro – 14kg / 31 lbs per isolator

The Arezzo Platter Mat is 294mm in diameter and made from an expanded neoprene material. It has been treated for static at the factory and will remain resistant to static during its lifetime. This listing is for the thinnest 1mm mat which weighs in at just 13 grams. 

With this introductory offer we are including free of charge our acclaimed Platter Damper (rrp. £19.95) which is a super flexible polymer disc of the same dimensions which sits between the platter and the mat and effectively damps the whole surface of the platter.  

The SRM TECH Arezzo Platter Mat is available in the following sizes – 1,2,3,4,5 & 6mm. Should you wish to experiment with different thickness mats - to alter the vertical tracking angle with no tonearm adjustment necessary - we do three combination kits: VTA-S kit consisting of 1,2 & 3mm mats, VTA-L kit consisting of 4,5 and 6mm mats and the Super VTA kit consisting of all six mats. These kits provide considerable savings over buying the mats individually. 

If you are buying one of these, you may wish to consider also buying our 'Revolution' Soft Clamp. This is a Record & Spindle Damping Device which compliments the Arezzo Platter Mat perfectly - indeed many customers using this mat on our incredible Arezzo turntable are also using the 'Revolution'. If you buy this at the same time, there is no additional postage to pay. 

The mat is shipped in a strong cardboard LP mailer, so it will reach you in the same perfect condition that it left us.

The Arezzo Platter Mat is 294mm in diameter and made from an expanded neoprene material. It has been treated for static at the factory and will remain resistant to static during its lifetime. This listing is for the 2mm mat which weighs in at just 15 grams. 

With this introductory offer we are including free of charge our acclaimed Platter Damper (rrp. £19.95) which is a super flexible polymer disc of the same dimensions which sits between the platter and the mat and effectively damps the whole surface of the platter.  

The SRM TECH Arezzo Platter Mat is available in the following sizes – 1,2,3,4,5 & 6mm. Should you wish to experiment with different thickness mats - to alter the vertical tracking angle with no tonearm adjustment necessary - we do three combination kits: VTA-S kit consisting of 1,2 & 3mm mats, VTA-L kit consisting of 4,5 and 6mm mats and the Super VTA kit consisting of all six mats. These kits provide considerable savings over buying the mats individually. 

If you are buying one of these, you may wish to consider also buying our 'Revolution' Soft Clamp. This is a Record & Spindle Damping Device which compliments the Arezzo Platter Mat perfectly - indeed many customers using this mat on our incredible Arezzo turntable are also using the 'Revolution'. If you buy this at the same time, there is no additional postage to pay. 

The mat is shipped in a strong cardboard LP mailer, so it will reach you in the same perfect condition that it left us.